5
4.
CONNECTING THE PAGER TO DAZATOOLS
Information about how to download and install the software can be found in chapter 3: INSTALL THE
4.1
STEP1: CONNECT THE PAGER TO THE COMPUTER
The USB port can be found at the bottom of the pager
behind the USB port slide (
). To access the port you
need to push the port slide down.
The original USB cable supplied with the pager is the
only
cable that should be connected to the USB port
) on the pager. Connect the other end of the USB
cable to the computer or laptop on which the
DazaTools software is installed.
4.2
STEP2: CONNECT THE PAGER TO DAZATOOLS
Make sure the Pager is turned on before starting the
DazaTools Program.
- To start the Pager, press the OK button for 5 seconds
until you hear a victory tune.
When the pager is connected to the
computer it will emit a beep and the
‘Connection’ icon will appear on the
pager display. All of the data on the
pager will now be synchronized with the computer.
Note!
Do NOT disconnect the pager while the
synchronization process is in progress.
Unable to establish a connection?
Check if the USB
cable is properly connected to the pager and the
computer or laptop. Then click ‘
Connect
’ in the Quick
Access Toolbar.
Once the
synchronization process has successfully
completed the Home tab will appear on the screen
and you will see the serial number and name you have
assigned to the pager in the bottom right-hand corner.
Содержание Pager 2
Страница 1: ...PAGER2 MANUAL 20160905...
Страница 4: ...1 1 WHAT S IN THE BOX 1 THE PAGER 2 CRADLE 3 USB Cable...