7)
Apply a small bead of glue to the inside of all joining surfaces of the
other
Side Panel
(
F
)
and the enclosure assembly. Then set in place applying enough pressure to ensure glue is spread
through each joint (some glue squeeze-out can be expected).
8)
Apply a small bead of glue to the inside of all joining surfaces of the
other
Top/Bottom
Panel
(
E
)
and the enclosure assembly. Then set in place applying enough pressure to ensure glue
is spread through each joint (some glue squeeze-out can be expected).
9)
Apply a small bead of glue to the inside of all joining surfaces of the
Baffle
(
E
)
and the
enclosure assembly. Then set in place applying enough pressure to ensure glue is spread through
each joint (some glue squeeze-out can be expected).