4)
Apply a small bead of glue to the inside of all joining surfaces of the
Back Panel
(
B
) and
one
Top/Bottom panel
(
E
). Then set in place applying enough pressure to ensure glue is spread
through each joint (some glue squeeze-out can be expected).
5)
Apply a small bead of glue to the inside of all joining surfaces of one
Side Panel
(
F
)
and
the back and top/bottom panel assembly. Then set in place applying enough pressure to ensure
glue is spread through each joint (some glue squeeze-out can be expected).
6)
Apply a small bead of glue to the inside of all joining surfaces of the
Brace
(
E
)
and the
back, top/bottom, and side panel assembly. Then slide in place applying enough pressure to
ensure glue is spread through each joint (some glue squeeze-out can be expected).
