5
Rear Panel
1. BLUETOOTH ANTENNA
2. AUTO ON CONTROL
This is a handy feature when using the DTA-100ST in conjunction with other
audio equipment.
It will safely turn off the amp when audio stops and will turn it back on when audio
is detected. (please see pg. 6 for a more detailed explanation)
3. LINE INPUT (AUX)
4. PRE OUT
Stereo RCA jacks allow for connecting the DTA-100ST to other audio equipment.
This signal level is controlled by the volume knob and will output whatever input
is selected. It is not affected by the High Pass Filter (HPF).
5. HIGH PASS FILTER
This will help remove low frequencies from the connected speakers to protect
from high-excursion. This feature is also particularly handy when using an external
subwoofer so that the main speaker and subwoofer outputs do not affect each other.
6. SPEAKER OUTPUT
Using insulated 2 conductor wire to connect to speakers. The polarity, positive
(+), and negative (-) for all speaker and amplifier connections must be consistent
so both the left and right speakers are in phase.
NOTE:
The speaker outputs are not bridgeable.
7. AC POWER INPUT
The DTA-100ST is capable of operation in 110V and 220V regions. The internal
power supply will automatically sense the power input and operate appropriately.
8. MAIN POWER SWITCH
Turns the device on and off.
Amplifier,Model NO.:DTA-100ST
100-240V~
50Hz/60Hz 100W
