background image

PRODUCT OVERVIEW

Congratulations on your purchase of the Dayton Audio DAX66 6-Source 6-Zone Distributed Audio System. You have chosen a unit that 

provides the ultimate audio control in six stereo zones (expandable to 18 stereo zones). The DAX66 is a true matrix audio system that 

delivers an extensive list of features for professional and residential installations. The DAX66 was designed for ease of installation by the 

integrator, and to be simple to operate for the user.

 

The DAX66 provides six analog line inputs, and one Toslink S/PDIF digital audio input. Play music from CD, DVD, satellite or cable box, 

PC, or personal audio device. The RS232 interface allows an automation system to manage and control the DAX66. Built-in IR repeater 

provides a path to control source devices through the IR target in the keypad. Operates with 4 ~ 8 ohm speakers in stereo mode, 8 ohm 

speakers in bridged mono mode, and provides a generous level of output power. 

 

Please read and retain this manual to get the most from your Dayton Audio DAX66 6-Source 6-Zone Distributed

 

Audio System. 

The DAX66 kit includes the following parts: 

1. 1 x Master Controller/Amplifier 

2. 6 x Keypad Controllers 

3. 1 x In-Wall Keypad Hub Connection Plate 

4. 1 x Infrared Remote Control 

5. 1 x Expansion Ribbon Cable 

6. 1 x Rack Mounting Kit 

7. 1 x Installation Guide/Operation Manual 

DAX66 MASTER CONTROLLER / AMPLIFIER — FRONT 

Peak LED

Standby/Zone ON LED 

All zones are in standby mode until activated 

by a keypad. A BLUE LED indicates a zone 

is in standby mode, a WHITE LED indicates 

that a zone is active. 

Power On/Off/Standby

 

 

Press the power button to turn the 

system on and place all zones in 

stand-by mode.  

The  PEAK  LED  indicates  a  connected 

source  level  is  too  high.  If  the  PEAK  LED  

emits a flashing or steady RED light, reduce 

the zone input or output level. 

!

daytonaudio.com

 

[email protected]

 

Содержание DAX66



















Отзывы: