Daytona mp26, Инструкции по эксплуатации и монтажу

Страница: 8 / 143

8
ADJUSTING THE VOLUME
Adjusting the volume
The volume can be adjusted in steps
from 0 (mute) to 66 (maximum).
➮
Increase the volume by pressing
the button
3
.
➮
Decrease the volume by pressing
the button
3
.
Setting the power-on volume
You can set the unit’s default power-on
volume.
➮
Press the MENU button
4
.
➮
Press the or button
9
repeat-
edly until “ON VOLUME” appears
in the display.
➮
Set the power-on volume using the
and buttons
9
.
To help you adjusting the volume more
easily, the audible volume level will in-
crease or decrease accordingly as you
make your changes.
If you select “LAST VOL”, the volume
played before the unit was last switched
off will be reactivated.
Note:
●
To protect your hearing, the maxi-
mum switch-on volume under the
“LAST VOL” setting is “38”. If the
volume was higher before the unit
was switched off and “LAST VOL”
has been selected, the volume will
be set at “38” the next time the ra-
dio is switched on.
When you have finished making your
changes,
➮
press the MENU button
4
twice.
Instantaneous volume reduction
(mute)
This feature allows you to instanta-
neously reduce (mute) the volume to a
level preset by you.
➮
Briefly press button
1
.
“MUTE” appears in the display.
To restore the volume,
➮
press button
1
again.
Setting the mute level
You can set the unit’s mute volume lev-
el.
➮
Press the MENU button
4
.
➮
Press the or button
9
repeat-
edly until “MUTE LVL” appears in
the display.
➮
Set the mute level using the and
buttons
9
.
When you have finished making your
changes,
➮
press the MENU button
4
twice.
Mute while telephoning
If your unit is connected to a mobile tele-
phone, the car radio’s volume will be
muted as soon as you “pick up” the tele-
phone. “PHONE” shows in the display.
This requires the mobile telephone be
connected to the car radio as described
in the installation instructions.
DaytonaMP26_EN2 3/15/06, 3:39 PM 8