1. Setup and initial usage
All electrical connections and components (except for the power plug) should be connected to
each other according to the following examples. Observe any relevant safety instructions!
Example with one converter and one daytime
®
matrix light, with an output of max. 240 watts:
Example with one converter, one two-way distributor (optionally available), and two daytime
®
matrix lights, with a total output of max. 240 watts:
2. Plug in the mains power plug or switch on the power supply /
supplies.
Note: During initial usage or after the power reserve of approximately 15 minutes has expired (e.g.
after a power failure), the status LED flashes red and displays: "Set clock!".
