The Rome Electric Bicycle User’s Guide
TPS Training Bulletin
Page 19
Maintenance and Troubleshooting
This section outlines problems you may have and solutions you may be able to use.
Note
Many of the parts in this product are not user-serviceable and should be repaired by
trained professionals. This is especially true of the electrical systems and the
mechanical components.
Alteration of these components voids the warranty.
Tire Pressure
Maintain the air pressure in your tires at the appropriate level. If the air pressure is too low,
your e-bike’s performance will suffer and it will become damaged more easily.
Cold weather and lower temperatures will cause the air pressure in your tires to drop, and
warmer weather will cause it to increase, even if there are no leaks in the tire tube.
To replace the air in your tires, follow this procedure:
1.
Identify the required pressure by examining the text along the side of the tire rim. This
text should indicate the recommended pressure for your tire.
2.
Locate the air valve on the inner surface of the tire rim.
3.
Remove the valve cap and place in a secure location.
4.
Place the nozzle end of an air pump (hand-power or mechanical) over the valve.
5.
Pump up the air in the tire, being careful not to let the pressure go above the level
prescribed on the side of the tire wall.
6.
Remove the pump nozzle from the air valve without allowing much air to escape from
the tire.
7.
Replace the valve cap on the air valve.
Note
Maintaining the proper air pressure will allow you to travel much further on a single
charge, because the motor will not have to work as hard to move the e-bike.
Replacing Flat Tires
Replacing flat tire tubes is a more complicated and labour-intensive process with e-bikes
than it is with regular bicycles. It requires proper tools, more skill and more patience.
The front wheel is easier to service when changing a flat tire than the rear wheel, as the
rear wheel is connected to the hub motor and other mechanical parts.
Unless you are very familiar with the mechanical components of the rear motor, attempting
to change a flat rear tire may cause serious problems.
Please contact your Daymak dealer for specific instructions on how to remove your wheel
and tires safely, and how to replace the tubes.
It may be easier – and safer - to have the tubes replaced by your Daymak dealer.
