DAYLIFF SUNVERTER 3, Инструкция по установке и эксплуатации

Страница: 9 / 40

5
3. INSTALLATION AND WIRING
CAUTION
For areas with altitude over 2000m, the inverter output
current should be derated at 10% for every 1500m increase in
altitude.
CAUTION
Do not switch off DC or AC power to the inverter while the
pump is running. The disconnect switch and/or MCB should
only be operated after the inverter is in stop mode otherwise
there will be damage .
2.6 Hybrid Operation
2.7 Others
WARNING
Maintenance and inspection must be performed by a
qualied technician.
WARNING
Do not disassemble the inverter during operation. The
inverter must be powered off atleast 5 minutes before
conducting maintenance and inspection and this is to avoid
the residual voltage of electrolytic capacitor in major loop
causing personal injuries.
CAUTION
Reverse engineering is not permitted.
WARNING
At the end of its design life, the inverter should be disposed
as industrial waste. During incineration, the electrolytic
capacitor may explode and some parts may produce toxic
and harmful gas.
3.1 Installation Direction
Ÿ
Leave enough installation space between inverter and other objects nearby to
ensure good ventilation and heat dissipation. As shown on
Fig 1 , please install the
0
invert vertically or backwards with maximum 10 inclination angle do NOT install it
horizontally or transversely.
Ÿ
Leave enough space in front of the inverter, install the inverter at a height that is
convenient to operate device and read information in the LCD display screen
NOTE
Installation of the inverter according to the specied
environmental conditions is the precondition for ensuring
long-term normal and stable operation of the inverter.