DAYLIFF SMARTCON 2, Инструкция по установке и эксплуатации

Страница: 23 / 28

4 19
The controller displays the pump(s) accumulated running hours. To view this, ensure the
pump(s) is not running. Press the key to switch to manual mode as per Fig 29. Press
and hold the key and key simultaneously until the controller make a sound.
This will display the current fault for Pump A, Fig 30.
Fig 28: Manual Mode Fig 29: The last failure of Pump A
Failure
Icon
Time Icon
S/N of Failure
Failure Sequence
Number
NOTE
To display Pump B faults, use the instructions as above, but
press instead .
5.4 Pump Running Hours Display
Fig 30: Manual Mode
Fig 31: Runs hours for Pump A
NOTE
To display Pump B run hours, use the instructions as above,
but press instead .
5.5 Communication Link and Remote Monitoring
Smartcon 2 comes with an inbuilt communication interface (Modbus RS485) that can
be used to integrate the controller to external Building Management Systems or iDayliff
IoT. Please contact Dayliff for more information on the integration.