DAYLIFF DPL 550, Инструкция по установке и эксплуатации

Страница: 11 / 16

Ÿ
The pump is equipped with a thermal overload protection. If overload occurs during
operation, the build in overload protection automatically deactivates the pump. The
pump will switch on automatically after a cooling period of approximately 3 minutes,
ensure the cause of the overload is identified and addressed.
Ÿ
All work listed in this manual must be performed regularly. If this maintenance work
cannot be performed by the end user, an authorised person must be commissioned to
perform this work. If these operations are neglected, faults may arise which are the
responsibility of the user. These include;
1. Damage to the motor, due to untimely or inadequate maintenance or cleaning
of the cooling fan cover.
2. Corrosion or other damage caused by incorrect storage of chemicals in pump
house.
3. Damage due to the use of spare parts which are not original
4. Damage due to maintenance and repair work not carried out by qualified
technicians
Always wait at least 10 minutes after power off to ensure no
residual voltage before maintenance and inspection,
otherwise it may cause injury.
5. VARIABLE SPEED PUMP OPERATION
1. Name
2. The display window
3. The power indicator
4.The remote control signal
receiver
5.100% button: the maximum
speed setting button (or timing
enter button).
6.80% button: 80% speed
setting button
7.50% button: 50% speed
setting button
9.Speed increase button (or
timing setting key)
10. Speed reduction button (or
timer setting key)