52
• Attach the nozzle you want to the device (see the “Attaching and Detaching Accessories”
chapter).
• Unwind the mains cable to its full length and insert the mains plug into a properly
installed plug socket that is easily accessible.
• Press the On/Off switch (2) to switch on the
vacuum cleaner.
• Guide the nozzle over the surface to be
cleaned.
• To switch off the vacuum cleaner, press the
On/Off switch again.
• Remove the mains plug from the plug
socket after use.
• To ensure optimum performance of the device, you should empty the dust container and
clean the � lters (see the next “Cleaning and Storing the Device” chapter) after every use.
Cleaning and storing the device
Caution!
• Always remove the mains plug from the plug socket before doing any cleaning of the
device.
• Keep the motor unit, the mains cable and the mains plug away from water or other liquids
in order to avoid electric shocks. Make sure that no liquid gets into the motor unit during
cleaning.
• Only the � lters may be cleaned with water. However, they must be completely dry before
they are assembled and attached to the motor unit.
• The � lters are not machine-washable, dishwasher-safe or suitable for tumble drying! Only
ever dry the � lters in the air, and never use a hair dryer to do so.
• Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the device.
These could damage the surfaces.
• The � lters may lose some of their colour over time. This is normal and does not have any
adverse eff ect on function.