3
Thank you for choosing the Voyager Touch ™ system, designed for remote operation of
computers over long distances via CAT 5 cables.
By choosing the VoyagerTouch, you have assured that your installation is equipped for the
ever-increasing demands made in a modern computer-based information environment.
The Voyager touch system allows one computer to transmit a monitor image and
receive serial touch signals from a touchscreen.
Features
The Voyager Touch local unit connects directly to the computer
Different remote end units can be used:
•
VoyagerTouch 60 Remote for up to 60 m distance
•
VoyagerTouch 60PCB Remote for up to 60 m distance for building in monitors
•
VoyagerTouch 125H Remote for up to 125m distance
•
VoyagerTouch 300 Remote for up to 300 m distance
•
Up to 300 meters in one line without repeater
•
For distances up to 1200 m a video repeater and a video-delayline compensator
might be necessary.
Operation
The Voyager touch is simple to operate, no need for driver or software installation.
Compatibility
This product has been tested with a wide variety of Touch panels and LCD monitors.
However, it is impossible to guarantee correct operation with every monitor currently on the
market.
The VoyagerTouch is compatible with the following equipment:
•
Monitor:
VGA, SVGA, XGA, SXGA, UXGA
•
Computers:
all computers using a HD-15 VGA output and standard VGA signals
•
RGB and two sync signals H/V
•
Serial touch equipment with one way communication
INTRODUCTION
