Daxten SCOUTCOMBO 16 -, Руководство по установке

Страница: 3 / 10

SCOUTcombo
Introduction
Thank you for purchasing the SCOUTcombo Switch. This product will ensure easy and accurate
control over 8 to 16 Servers through a single console. The SCOUTcombo is compatible with USB style
computers. The SCOUTcombo supports high resolutions of up to 2048 x 1536 without any
deterioration of the image quality. Switching between PCs can be accomplished in three ways:
through keyboard Hot Key commands, the On Screen Display (OSD) or by using the convenient front
panel PC selection buttons.
Product Features

Allows a user to control 8
– 16 computers from one console.

No additional software is required for operation.

Supports Monitor resolutions of up to 2048 x 1536 @ 85Hz.

Supports VGA, SVGA and MultiSync monitors.

Select via Push-button, Keyboard Hot Key control or Menu Driven OSD

Comes with Auto-Scan mode for convenient automatic switching.

Front panel status LEDs give a clear indication of the active PC.
 Rack Mountable in 19” Rack (1U).

Tri-Level Cascade, allowing up to 4096 Servers to controlled from one console.
Hardware Installation
Before connecting your computers and console devices to the SCOUTcombo switch, please ensure
that all devices are powered off.
Using the SCOUTcombo
The SCOUTcombo provides three methods to select the desired computer. You may either use the
Select button on the unit, use the keyboard Hot Key commands, or use the Menu Driven OSD.
Note: USB keyboards with an integrated USB hub are not supported.
Rear Panel Layout 164-Port switch