DAXOM UKDAX-11ST, Руководство по установке и эксплуатации, Страница: 11 / 16

The fault code may occur on the Lcd display when the device does
not operate and the device may give an audio warning. The
meanings of these codes are:
Fault codes FAILURE DESCRIPTION
E0 Water Inlet Sensor Failure
E1 No ignition
E4 Fan Failure
E6 NTC Failure
When the button is pressed the temperature you want to set will
increase and when the button is pressed the temperature you
want to set will decrease.
Your water heater has the capacity to heat 11 lt of water per minute.
If you would like to obtain high temperature from the water heater in
winter months (like 65 C) please set the adjustment valve in the cold
water inlet to minimum position.
Please check the temperature of the water with your hand before
aiming it to your body against any burning event.
5.1.1.Water And Temperature Kontrol