3
INSTALLATION GUIDE AAMS-6001
MATERIALS & TOOLS
Safety Glasses, Pencil, Level, Tape Measure, Stud Finder, Assorted Screwdrivers, Assorted Wrenches,
Drill, Screw Gun, Caulking Gun, Hammer, Screws, Nail Anchors/Molly Screws
BEFORE YOU BEGIN
●
Comply with Plumbing Codes
Before installing any Dawn product in your new or remodeled kitchen, you should make sure that you are in compliance with all
local plumbing codes.
●
Check Product Condi on
Before installa on, please check the condi on of the product and, if appropriate, its components. If there is any problem with
the product and/or its components, please contact the store you purchased it from for a replacement. As soon as you have in-
spected your product, please return it to its original packaging un l you are ready to install it.
●
Handle with Care
To protect its finish and avoid damage before and a er installa on, please handle the product with care. For care and cleaning
ps a er installa on, please refer to the
Care and Cleaning Guide
in this instruc on guide.
REMOVE & REINSTALL THE DRAWER
To ease installa on, remove drawers from the vanity before beginning.
●
Removal
●
Reinstalla on
Pull the drawer out un l it stops. From un-
derneath the rails, loosen and remove the
moun ng screws.
Li the front of the drawer and pull the
drawer away from the cabinet.
Fully extend the rails. Align the holes on the underside of
the drawer with the rails and set into place.
From underneath the rails, screw back the moun ng screws.
Lightly li the front of the drawer to ensure the drawer is
locked into place. Slide the drawer in and out of the cabinet
to ensure smooth opera on.
