Dawlance GLAMOUR INVERTER 45 FS, Инструкция по эксплуатации, Страница: 13 / 32

REMOTE CONTROLLER
11
Replacement of Batteries
Remove the battery cover plate from the rear of the remote controller,
by sliding it in the direction of the arrow.
Install the batteries according the direction (+and -)shown on the Remote
Controller.
Reinstall the battery cover by sliding it into place.
Use 2 LRO 3 AAA (1.5V) batteries . Do not use rechargeable
batteries . Replace the old batteries with new ones of the same
type when the display is no longer legible.
Do not dispose batteries as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary.
1. Direct the remote controller toward the Air conditioner.
2. Check that there are no objects between the remote control
and the Signal receptor in the indoor unit.
3. Never leave the remote controller exposed to the rays of the sun.
4. Keep the remote controller at a distance of at least 1m from the
television or other electrical appliances.
Note
Child-lo
ck:
Press a
nd
Togethe
r to acti
ve
Display
ON/OFF
:
Long pr
ess ECO
b-
utton.
Please r
emove b
a-
Tteries
to avoid
le-
akage d
amage w
-
Hen not
using fo
r
A long t
ime.
Note
Child-lock:Press and
together to active.
Display ON/OFF:
Long press ECO button.
Please remove batteries
to avoid leakage damage
when not using for a long
time.
When you insert the batteries for the first time in the remote
controller or if you change them, you can program the remote
controller of only cooling or cooling and heating.
1. Long press MODE button over 5s to get into the change mode
within 3minutes;
2. Press MODE button to change COOL or HEAT.
NOTE: If you adjust the remote controller in cooling mode,
it will not be possible to activate the heating function in units with
heating pump . you need to take out the batteries and repeat the
procedure described above.
When you insert the batteries for the first time in the remote
controller or if you change them, you can program the temperature
O O
display switchover function between C and F.
1. Long press TURBO button over 5s to get into the change mode
within 3minutes;
O O
2. Press TURBO button to change C and F.
Signal
receptor