This microwave oven uses modern electronic control to adjust cooking parameters to meet your needs
better for cooking.
1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press "STOP/CLEAR", the oven will go back to
the previous status automatically.
Operation Instruction
1. Clock Setting
2. Microwave Cooking
Microwave Power Chart
Note:
the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
Note:
07
08
When the microwave oven is electrified, the oven will display "0:00", buzzer will ring once.
a. Press "CLOCK/PRE-SET", the hour figure flash.
b. Turn " " to adjust the hour figures, the input time should be within 0—23.
c. Press "CLOCK/PRE-SET", the minute figures will flash.
d. Turn " " to adjust the minute figures, the input time should be within 0—59.
e. Press "CLOCK/PRE-SET" to finish clock setting. ":" will flash.
a. Press the "MICROWAVE" key once and "P100" display.
b. Press "MICROWAVE" for times or turn " " to select the microwave power from 100% to
10%. "P100", "P80", "P50", "P30", "P10" will display in order.
c. Press "START/+30SEC./CONFIRM" to confirm.
d. Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00).
e. Press "START/+30SEC./CONFIRM" to start cooking.
3. Speedy Cooking
a. In waiting state, press "START/+30SEC./CONFIRM" key to cook with 100% power level for 30
seconds. Each press on the same key can increase 30 seconds. The maximum cooking time
is 95 minutes.
b. During the microwave cooking and time defrost process, press "START/+30SEC./CONFIRM"
to increase the cooking time.
c. Under the states of auto menu and weight defrost; cooking time cannot be increased by
pressing "START/+30SEC./CONFIRM"
d. In waiting states, turn " " left to choose the cooking time directly. After choosing the time,
press "START/+30SEC./CONFIRM" to start cooking. The microwave power is 100%.
4. Defrost By Weight
a. Press "W.T./TIME DEFROST" once, the screen will display "dEF1".
b. Turn " " to select the food weight. The range of weight is 100-2000g.
c. Press "START/+30SEC./CONFIRM" key to start defrosting.
5. Defrost By Time
a. Press "W.T./TIME DEFROST" twice, the screen will display "dEF2".
b. Turn " " to select the cooking time. The maximum cooking time is 95 minutes.
c. Press "START/+30SEC./CONFIRM" key to start defrosting.
6. Multi-Stage Cooking
Two stages can be maximally set. If one of the stage is defrosting, then it should be put in the
first stage. The buzzer will ring once after each stage and the next stage will begin.
Example: if you want to defrost the food for 5 minutes, then to cook with 80% microwave power for 7 minutes.
The steps are as following:
7. Pre-set Function
a. Set the clock first. (Consult the instruction of clock setting)
b. Input the cooking program. Two stages can be set at most. Defrosting should not be set in
preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
c. Press "CLOCK/PRE-SET ". The hour figures flash.
d. Turn " " to adjust the hour figures, the input time should be within 0—23.
e. Press "CLOCK/PRE-SET", the minute figures will flash.
f. Turn " " to adjust the minute figures, the input time should be within 0--59.
g. Press "START/+30SEC./CONFIRM" to finish setting. ":" will light, buzzer will ring twice when
the time arrives, then cooking will start automatically.
a. Press "W.T./TIME DEFROST" twice, the screen will display "dEF2".
b. Turn " " to adjust the defrost time of 5 minutes.
c. Press "MICROWAVE" once.
d. Turn " " to choose 80% microwave power till "P80" display.
e. Press "START/+30SEC./CONFIRM" to confirm.
f. Turn " " to adjust the cooking time of 7 minutes.
g. Press "START/+30SEC./CONFIRM" to start cooking.
i. Press "MICROWAVE" once
ii. Turn " " to choose 80% microwave power till "P80" display
iii. Press "START/+30SEC./CONFIRM" to confirm
iv. Turn " " to adjust the cooking time of 7 minutes; after the above steps, please do not press
"START/+30SEC./CONFIRM". Then do as following:
clock must be set first. Otherwise, pre-set function will not work.
Microwave Power
Display
100%
P100
P80
P50
P30
P10
80%
50%
30%
10%
Note:
Note:
Auto menu cannot be set as one of the multi-stage.
