Davolink DV-302, Руководство по эксплуатации

Страница: 23 / 65

DV-302 OPERATION MANUAL
13
4.2.5 Backup port
This port is used for connecting to FXS I/F of PBAX using RJ-11 Connector.
TABLE 5. BACKUP PORT PIN CONNECTION
PABX/KEY PHONE PORT CONNECT BACKUP PORT PORT
PIN SIGNAL PIN SIGNAL
1 NC 1 NC
2 NC 2 NC
3 Ring 3 Ring
4 Tip 4 Tip
5 NC 5 NC
6 NC 6 NC
4.2.6 Cable Length
The maximum Length of cable for each interface must comply with the following:
Ethernet - Maximum length of 10/100BaseT Ethernet is 330 ft./100m (IEEE802.3
standard)
Analog Line - Maximum length of analog line is defined by loop resistance
(Approximately 1.5Km@1REN). Maximum loop resistance is up to 600
Ω
(included
telephone/voice switch).
4.2.7 Connection to Network
Figure 9 below illustrates the connections to Home Router. DV-302 supports one of
Bridge/NAT mode for Data traffic.
Figure 6. Ethernet Port Pin Connection