cut it again around the dotted line and place it on the inside of the wooden facade of the adjacent
cupboard and leave the same distance below the C line of the template. Mark the holes now and
screw the cornice with the screws and washer in the bag.
Install two 2 W LED lamps to the case. To avoid any noise or vibration, it is advisable to place
foam tape on the back between the hood and the wall or on the top between the hood and the
cabinet, depending on how your hood is secured.
Warning! Failure to follow these instructions for device mounting and screw insertion may
result in electric shock
The hood can be used either to extract odors out, or to filter air and recycle in the same room.
Installation must be performed accordingly. A recycling solution is advisable in cases where outlet
piping cannot be installed.
Chimney connection for outward air extraction
Insert the plastic connection at the outlet of the appliance at the top. The plastic connection snaps
to the top of the hood
