Red:
PWR+(12...48VDC)
Black:
PWR-(OVDC)
Green:
B
White:
A
Recommend to use 24VDC power.
The signal cable from sensor should be protected by corrugated hose or the Φ16 plastic tube, keep the cable avoid
high temperature areas.
The bracket will be fixed on the wall or material with a flat surface with 02 x M4 screws (supplied by the customer);
Each cable includes wires which are marked labels according to types of connection. (user should not cut these
labels before installation to avoid confusing)
6.3 Installation location
Please install the device at a height of 2 meters or less.
ATTENTION:
DO NOT
install the Wireless bridge or its antenna inside a completed metallic box or housing, because the RF
signal can not pass through the metallic wall. The housing is made from Non-metallic materials like plastic,
glass, wood, leather, concrete, cement…is acceptable.
