daviteq iConnector STHC, Руководство пользователя

Страница: 16 / 30

Press button "Connect" to allow the Software connect with iConnector
If connect successful, you will see Status shows "connected" as below picture
If NOT, Status shows "disconnected"
Cellular iConnector use the 2G, 3G or 4G connectivity to connect to IoT Server;
It requires the Data SIM Card to be inserted into iConnector;
Contact the Network Operator of Sim card to get the following information:
APN:
Username:
Password:
Click to the Tab 2G/3G on the Software;
3.3 Configuration parameters for
iConnector
* There are many parameters of iConnector to be configured before using.
* However, most of the parameters were configured by the manufacturer.
* Customer will only need to configure some parameters like: APN, Username, password for Cellular iConnector,
or other parameters.
* Please refer below sections to configure the parameter you want.
3.3.1 Configure the SIM card information for
Cellular iConnector
3.3.1.1 How to configure the APN Name? Please follow these steps: