Daviscomms MTD2000 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 105

background image

MTD2000 AT Command Guide R12

Confidential

DAVISCOMMS (S) PTE LTD

3 /105

07A 31-Jul-09

CF Chan

1. Revised default data buffer to 300 reports.

08

01-Aug-09

CF Chan

1. Added $MS and $MC for mileage counter.
2. Added GPS antenna detection.

3. Added error code 2303 to indicate failure to send report via

SMS.

09

16-Sep-09

CF Chan

1.  Increase APN length to 40 characters in $NG command.
2.  Increase watchdog timeout to 65 seconds.
3.  Revised SMS recipient in $EI to single SMS number.
4.  Revised minimum report interval in $CR to 5 sec.

10

02-Oct-09

CF Chan

1.  Added a System Overview section.
2.  Added $SIM for dual SIM card.
3.  Added GSM/GPRS commands pass through.
4.  Removed  the  support  of  the  following  characters  (text

message, report, etc) which are not in the default GSM
character set: [ \ ] ^ _ ` { | } ~

10A 10-Mar-10

CF Chan

1.  Added $LB for low battery shutdown.
2.  Revised interval of data log to 60 sec and above.
3.  Revised the maximum length of AT command and event

to 120 characters.

11

17-May-10 CF Chan

1.  Added $GF and $GS for geo fence.
2.  Added $AI and $AO for analog input and output.
3.  Added $FSD and $FSO for fail safe output.
4.  Added $MD for motion sensor sensitivity.
5.  Added $DI for driver ID.
6.  Added $OS for over speed detection.
7.  Added $KR for key on reset.
8.  Added $GM for GSM modem.
9.  Added $SU for over the air firmware upgrade.
10. Added $CV for voice call and silent call.
11. Added $CA for auto answer incoming call.
12. Added $CS for MIC gain and speaker volume.
13. Added $GC and $GA for dead reckoning calibration.
14. Added $BC for battery charging control.
15. Added hardware watchdog timer.
16. Added test mode for peripheral test.
17. Support 5000 reports for data logging.
18. Removed $LB for low battery shutdown.
19. Revised the maximum length of AT command and event

to 150 characters.

12

1-Jun-10

Kyle Hor

1. Updated system code 2105 to include possibility that no

battery is present.

2. Added precaution not to send $SR via SMS at less than

10sec interval.

3. Added $MZ for motion detect calibration and modified

calibration mode not to be unique to gyroscope only.

4. $MD accuracy range and default value changed.

«
1
2
3
4
5
...
»

Содержание MTD2000










































































































Отзывы:

Нет отзывов

Похожие инструкции для MTD2000

Бренд: Magnadyne Страницы: 2

Бренд: Queclink Страницы: 2

Бренд: 5G HUB Страницы: 14

Бренд: Navman Страницы: 116

Triton Triton 300

Бренд: Magellan Страницы: 56

Бренд: Gator Страницы: 22

Бренд: Garmin Страницы: 120

Бренд: Garmin Страницы: 40

Бренд: Garmin Страницы: 108

GPSMAP 86 Series

Бренд: Garmin Страницы: 218

Бренд: Garmin Страницы: 214

Бренд: Garmin Страницы: 68

Бренд: Hi-Target Страницы: 71

Бренд: Garmin Страницы: 236

Бренд: QUALISYS Страницы: 2

Бренд: SafetyTracer Страницы: 6

Бренд: Novatel Страницы: 92

Бренд: Diy Track Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды