11
Remote Modem Connection Notes
Note: The default value for the baud rate setting is 19200. If you have a Weather Envoy, this
value should remain the same in the WeatherLink software. The baud rate settings
screen displays only if the data logger has been installed.
The baud rate setting on the console must be same as that set in the Weather-
Link software. Use the up (+) and down arrows (-) to change the baud rate set-
ting, if needed. Press and hold DONE to return the console to the current
weather mode.
•
Use the fastest baud rate your modem can handle. 19200 is the fastest baud
rate available and is the default setting on the console.
•
Press DONE when the correct baud rate displays on the console screen.
Pressing DONE in this screen sends the initialization string to the modem,
so you don’t have to turn the console on and off again.
Remote Modem Connection Notes
When accessing a remote modem connection, WeatherLink automatically
dials the station and console whenever an action has been performed in the
software that requires it to talk to the station.
While connected to a remote station, an
On-Line
icon displays in the toolbar.
This icon indicates that WeatherLink has established a connection with the
remote console and weather station. Select the
On-Line
icon from the toolbar
or select Hang Up from the
File
menu to disconnect the phone connection.
Toolbar with On-Line Icon
Online
(Hang Up)