background image

Alarm Mode

30

UV Dose

The UV dose alarm sounds when the accumulated UV dose has exceeded the 
dose you set. The UV dose alarm does not arm unless the initial UV dose for 
the day has been reset. Once the UV dose alarm value is set, clear the accumu-
lated UV dose. See “Clearing Weather Variables” on page 26. 

Setting Alarms

1. Press ALARM to enter the Alarm Mode to view or set the high alarm 

thresholds. The screen displays the current high alarm thresholds. The 
ALARM and HIGHS icons also appear. 

2. Press the right and left arrows to select one of the variables displayed on the 

screen or use the console keys to select any weather variable. Also, press 
HI

/

LOW to display the toggle between the high and low alarm threshold 

settings.

3. Press 2ND then press ALARM to activate the currently selected weather 

variable.

4. Press the right and left arrows to select digits in the threshold value.

5. Press the up and down arrows to change the digit’s value up and down. 

6. Press DONE to finish changing the alarm setting.

7. Repeat steps 3 through 6 to change additional alarm settings.

8. Press DONE to exit Alarm Mode.

Setting the Time Alarm

1. Press ALARM to enter alarm mode. 

The ALARM and HIGHS icons appear. 

2. Press 2ND, then press TIME, then press 2ND

 

again

,

 and then press 

ALARM.

The time field begins blinking. 

3. Press the left and right arrows to select hours, minutes, or AM/PM. 

4. Press up and down arrows to change the digit’s value up and down. 

5. Press DONE to exit Alarm Mode.

Clearing Alarm Settings

1. Press ALARM to enter alarm mode. 

The ALARM and HIGHS icons appear. 

2. Select the alarm setting you wish to clear. 

3. Press 2ND, then press and hold CLEAR until the setting changes to all 

dashes.

You have cleared the alarm setting.

4. Press DONE to exit Alarm Mode.

Содержание Vantage Pro2 Updater

























































Отзывы: