5
© 2020 Davis Packaging : DPM39-0320ARef
Basic Wrapping Technique
The following is a simple method to wrap bundles. There is no incorrect method, technique will
evolve as one gains experience. As long as the final product is an attractive sealed bundle you
are wrapping correctly!
1. Pull film length roughly 2x the width of the
bundle. Lay gently and smoothly across
cutting rod guard onto work area. Do not
cut film from roll.
2. Place bundle face down
on top of film. For cleanest
finished appearance. Face
up if not a concern.
3. Bring front edge of film
up and over the bundle to
the back edge of the
bundle.
P: 800.622.3015 / 561-290-0412 □ E-mail: [email protected]
www.davispackaging.net
4. Grasp left and right side of film
between front of guard and guard
lever.
5. Simultaneously pull film
forward and push down on guard
lever to raise cutting rod and cut
the film.
Do not let go of the film.
6. Fold cut end of film over
back of bundle overlapping
ends by at least 1/2”.
