Setup Mode
12
To change the barometric reduction
setting:
1. Press + or - to change the
barometer reduction setting
type:
•
NOAA (Default Setting)
— The barometer is reduced to sea level using a
technique that factors in the humidity and temperature of the column of
air.
•
ALT SETTING (Altimeter Setting)
— The barometer is reduced to sea
level using a “standard” column of air, often referred to as a “standard
atmosphere.”
•
NONE
— Reports a raw barometric pressure reading unadjusted for ele-
vation/altitude.
2. Press DONE to move to the next screen.
Note: See “Calibrating Barometric Pressure” on page 28 to learn how to fine-tune your
barometric pressure to a local source.
Screen 12: Wind Cup Type (Optional)
The Wind Cup Type screen displays if you selected VP2 or WIND in Screen 6 of
the Setup Mode. This screen does not display if you have selected a Vantage
Vue ISS. See “Screen 6: Configuring Transmitter IDs” on page 9 for
more information.
The Wind Cup Type screen contains three options: LARGE, SMALL, or
OTHER. In most Vantage Pro2 anemometer or ISS Installations, LARGE is the
cup type that is shipped with all Vantage Pro2 anemometers. See the
Vantage
Pro2 Console Manual
for more information.
To change the wind cup type:
1. Press the + and - keys to scroll
through the three wind cup
options.
2. Press DONE to use the selected
setting and move to the next screen.
Note: Do not change the wind cup type from LARGE if you are using the wind cups that were
shipped with your system.
Screen 13: Rain Collector
The tipping spoon in the Vantage Vue
rain collector has been calibrated at the
factory to measure either 0.01'' or 0.2mm
of rain with each tip depending on the
model. This screen is used at the factory
for this calibration. The typical user will
not need to change it and can skip this screen.
Note: This screen will not change the units on your display. To change the units on your display
from inches to mm, or vice versa, see “Selecting Units of Measure” on page 26.
in
Содержание Vantage VUE
Страница 1: ......
