Installing Components into the MPS
Page 5
Sensor Interface Module (SIM), Alarm Output Module (AOM), and Heater
The illustration below shows an MPS installation which includes the SIM,
AOM, and a heater. When installing, make sure the cable tie mounts are
attached to the MPS wall so the centers of the mounts are the indicated
distance from the bottom of the shelter, as shown below.
SIM, AOM,
AND
H
EATER
I
NSTALLING
C
OMPONENTS
INTO
THE
MPS
The sections below show where and how the various system components
install into the MPS. You will need to consult the installation manuals supplied
with each system component for instructions on wiring your installation. You
may want to wait until you have actually mounted the shelter (See “Mounting
the MPS” on page 9) before routing cables into the shelter.
