Product # 8161
E
DriveRight
®
600
E
A
DAPTER
C
ABLE
This manual provides additional instructions necessary to install the DriveRight
600
E
adapter cable and is intended to be used with one of the DriveRight
installation manuals listed below:
• If you are installing DriveRight 600
E
model number 8126GD or 8126HD,
refer to the “DriveRight Installation Manual” (7395.043).
• If you are installing the DriveRight 600
E
model 8126VSS , refer to the
“DriveRight VSS Installation Guide” (7395.062).
• If you are installing the DriveRight 600
E
model 8126OBD, refer to the
“DriveRight OBD Installation Guide” (7395.198).
Additional Components
The following additional components are included with the DriveRight 600
E
.
Butt Splices (3)
(26-22AWG or
24-20AWG)
Insulated Male
Disconnects (2)
(18-22AWG)
In-Line Splice (2)
T-Tap Disconnects (2)
Red (18-22AWG)
Blue Wire (2)
with Fuseholder (22 AWG)
Adapter Cable
Fuses (2)
(3AG
1-1/4 x 1/4",
.25A,
Slo-Blo)
(Fuses are
factory installed)
