DaVinci 72 SS Timber, Руководство по установке

Страница: 9 / 24

DaVinci 72” SS Timber Fire Log Set
Installation Instructions
Page 9 of 24 17602248 — 7/25/22 © Travis Industries, Inc.
15. Install one of the log #4's as shown
to the right. The front of the log
faces the wall of the firebox. Install
the log on the right rear corner of
the log grate. Looking at the back
of the log, there is a large cutout on
the left end of the log. The cutout
fits around the burner cluster shield.
With the log on the log grate, move
it left until it is up against log #2.
Push the log backward until it is up
against the rear vertical log grate
fingers.
Faces the rear glass Faces you
16. Install the remaining log #4 as shown
to the right. The log installs in the
same manner as the previous log but
faces the front of the fireplace. The
right end of the log should
completely obscure the front of the
burner cluster shield. The char mark
on the front of the log should be
visible between the log grate fingers.
Faces you Faces the rear glass
Burner
Cluster
Shield
DRAFT
DRAFT
DRAFT