DAVINCI GLIDERS TANGO L Скачать руководство пользователя

Страница: 6 / 21

DAVINCI GLIDERS / TANGO

3. Introduction and Pilot Target

The TANGO is an EN-C high performance glider. It has been designed for high skilled pilots for the ultimate
XC flight in comfort.

The TANGO is an easy and fun paraglider with excellent glide and a very efficient speed system designed
as a EN-C class glider.

Long brake travel and excellent passive safety, as well as the good stability make the

good ideal for progression.

TANGO will be the most comfortable glider designed for the pilot who wants XC. The Smart nose system is

applied to TANGO.

Tango has special riser system and Smart Nose System designed by unique idea of Davinci Gliders. We hope

you will enjoy a safe and enjoyable flight with the high quality and durable fabrics and materials in optimal

designing technology.

-LTF and EN certification

The TANGO is certified during official testing as LTF /EN-C.

The glider has been type-tested for “one-seated” use only.

-For the TANGO it has minimum of 65cm symmetrical travel length at maximum total-load.

It would be dangerous to use the brake travel according to those numbers, because it is

not practicable to measure the brake travel during flight, and in turbulences the stall might

occur with less brake travel. If you want to use the whole brake travel of your glider safely, it

is necessary to do many intended spins and full stalls to get a feeling for the stall behaviour.

The TANGO does not have the trimmer system.

4. Harness

The TANGO is certified for harnesses in Group GH(without rigid cross-bracing). The suspensiion points of

the chosen harness should ideally have a caraviner distance of approximately 43cm and a height of 46cm
(TANGO XS 44cm).

Содержание TANGO L






















Результаты поиска

Содержание TANGO L

Отзывы:

Похожие инструкции для TANGO L

Бренды по названию

Популярные бренды

DAVINCI GLIDERS TANGO L, Руководство пользователя

Результаты поиска

Содержание TANGO L

Отзывы:

Похожие инструкции для TANGO L

Бренды по названию

Популярные бренды