background image

DAVINCI GLIDERS / TANGO

12

17. Warrantee 

18. Respecting nature and environment

The producer guarantees the correctness of the declared characteristics and the paraglider’s 

normal performance for One year after the purchase date. The producer conducts special, and 

after warranty repairs and maintenance at the owners’ request for an extra price.

We recommend to inspect your paraglider (including checking suspension line strength, line 

geometry, riser geometry and permeability of the canopy material) one time at one years, or 

every 100 hours of flying time (whichever comes first); Those inspection must be made by 

manufacturer, importer, distributor, dealer or other authorised persons. The checking must be 

proven by a stamp on the certification sticker on the glider as well in the manual book.

Finally, we would ask each pilot to take care of nature and our environment. Respect nature and 

the environment at all times but most particularly at take-off and landing places. Respect others 

and paraglider in harmony with nature.

Do not leave marked tracks and do not leave rubbish behind. Do not make unnecessary noise 

and respect sensitive biological areas.

The materials used on a paraglider should be recycled. Please send old Davinci gliders back to us 

Davinci Gliders office. We will undertake to recycle the glider.

16. Caring tips

- Do not expose your glider to the sun any longer than necessary

- Keep it away from water and other liquids

- Do not let the front edge hit the ground

- Keep your glider away from fire

- Do not put anything heavy on your glider, do not pack it in a rucksack too tightly.

- Regularly inspect the canopy, lines, risers and harness. If you find any defects, 

    contact your dealer or the manufacturer. Do not attempt to repair the paraglider by yourselves.

- If you detect a damaged line, inform the dealer or manufacturer about the line number   

  according to the line plan

- Keep your TANGO in a bag in a dry well-ventilated place under neutral temperature and 

  humidity conditions

- If you do not use the glider, then once a month you should unpack it, ventilate it well, 

  and then pack it back in the bag

Содержание TANGO L






















Отзывы: