3D Scanning
3D Scanning
3D Scanning
3D Scanning
Menu
“
Structured
Light
Scanning
“
•
Place scanner and object in front of each other, like you did during calibration.
If the distance is too different, the projected stripes and camera image will be out of focus. In this case,
correct the distance, not the focus rings.
Important: For each scan, observe that the red sine waves are not cut off / overdriven (this refers only
to the image regions where the circular wave pattern is visible). Should a correction be required,
carefully adjust the camera aperture, but do not change the focus.
•
Each click on “Start” performs a new scan.
DAVID projects a set of different stripe patterns and records the images. This takes 2-4 seconds,
depending on the settings.
11
3DPE.ir
