DAVID PRO-DX, Руководство пользователя, Страница: 8 / 16

8
OPERATING INSTRUCTIONS
Starting The Machine - Figures 1 & 2
Before turning on your vacuum cleaner, make sure that the vacuum handle is in
its upright locked position and that you have a firm hold on the handle grip to keep
the machine from moving forward.
1. Turn the quick release cable hook (#15, figure 1) to the up position
by moving it to the left or right.
2. Release the power cord plug from the power cord
and lift the cord off of the upper cord hook (#26, figure 2).
3. With the switch (#2, figure 2) in the “O” (OFF) position, plug the
polarized power cord into a 120 volt outlet located near the floor.
Switch Position
O = OFF
I = ON
Operating the Machine - Figure 3
When the machine is switched on with the handle in the upright locked position,
the power head and brush automatically rise from the carpet. To release the
machine from the upright locked position, press down on the foot pedal (19) and
lower the handle into the normal operating position. The power head and brush
will automatically lower to the appropriate height.
The handle can be lowered to an intermediate stop position in order to lift up the
brush head for maneuvering over rugs, etc. To lower the handle to a horizontal
position useful for vacuuming under beds, the foot pedal must be pressed a sec-
ond time. The intermediate stop position can be closed off by the orange-colored
slider (27) on the back of the swivel neck (20), so that the handle will go from ver-
tical to horizontal in one movement.
WARNING!
The quality, condition, coating, texture, age and manufacturing technique of all floor surfaces vary.
Therefore, upright vacuums with rotating brushes, including your DAVID
®
PRO-DX , may damage some floor coverings or sur-
faces. Some types of high-gloss hardwood floors, cushion vinyl, berber carpets, long shag, and delicate or hand-woven carpets
are particularly vulnerable to damage by rotating brushes. When possible, consult the materials supplied by your floor’s man-
ufacturer for information on proper upkeep and cleaning.
To ensure that your new DAVID
®
PRO-DX vacuum cleaner is com-
patible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to
determine if any damage occurs. If damage occurs, stop using the vacuum cleaner immediately!
Care must be taken to ensure that the bottom of the machine does not contact the floor. If this happens, damage to the floor
could occur. If damage occurs, stop using the vacuum cleaner immediately!
15
2
26
27 19
!
Figure 1
Figure 3
Figure 2