DAVID 4, Руководство пользователя

Страница: 25 / 38

10/31/2016 DAVID ­ DAVID 4 Manual
http://www.david­3d.com/en/support/david4/print­version 25/38
Auto Add to List
Automatically adds the new scan (after result filtering was applied) to the List of Scans .
Auto Align to Previous
Automatically aligns the new scan to the previous one. If possible, the alignment mode currently set
in 'Shape Fusion / Alignment' is used. This mode is only available, if
Auto Add to List
is checked.
↑
| Scanning | Result Filtering
Smoothing
With the smoothing filters under "Result Filtering" you can smooth the 3D scan result manually. However,
we recommend not to do this (set filters to 0). If your scans are noisy or wavy, you should rather optimize
the scanning conditions (brightness settings, room conditions). More smoothing options are available in the
"Shape Fusion" menu later on.
Quality Check
The filter
Quality Check
removes scan data that are likely to be inaccurate. This is possibly on the edge of
the scan or at transitions between light and dark areas. You can change the filter value and see the effect
immediately on the scan. The recommended value is 0.5.
Background Removal
You can automatically remove an undesired background from your scene. First, run
Scan Background
.
Second, ensure that
Background Removal
is activated. This procedure needs to be repeated whenever the