-11-
OPERATION MODES
Variable Rotation Speed
(Remote Only)
The Variable Rotation Speed Mode
keypad
180°
10°
45°
90°
RPM
on the remote control will
give you the option of increasing or
decreasing the speed of the rotating
laser. Repeatedly pressing the
180°
10°
45°
90°
RPM
keypad will adjust the speed from
600, 300, 120, and 0 RPM.
Scanning or Sweeping
(Remote Only)
The Scanning Mode on the remote
control
creates a shorter, brighter
laser “chalk line” that can be used for
leveling or plumbing. This feature can
also be used to keep the instrument
from interfering with other lasers
and detectors on site. Pressing the
Scanning Mode keypad
180°
10°
45°
90°
RPM
, will
lengthen or shorten the scan area
of the laser beam. There are five (5)
preset angles of 0°, 10°, 45°, 90°,
and 180°.
While in Scanning Mode, the
position of the scanning area can be
adjusted. Press the Clock-Wise
180°
10°
45°
90°
RPM
and Counter-Clock-Wise
180°
10°
45°
90°
RPM
Beam
Positioning keypads on the remote
control.
Slope/Automatic Mode
When the instrument is set upright for
horizontal rotation, the slope can be
adjusted by using Manual Mode
3b
.
Press the Manual/Automatic keypad
180°
10°
45°
90°
RPM
, the instrument will enter into the
mode of manual adjustment.
The slope/automatic mode can also
be switch ON and OFF with the
remote control.
Anti-Drift System (ADS)
Enable to the ADS system
3c
to alert
user when laser has been disturbed.
Press the ADS button
180°
10°
45°
90°
RPM
to activate.
When the LED is blinking slowly, the
laser is in H.I Alert mode. When the
light is blinking quickly, the laser level
will not level as it has been disturbed
and needs reset.
Vertical Laydown Positioning
Using the trivet
8
, place the laser
instrument in the laydown position on
a flat, level surface.
Press the Power ON/OFF
3a
keypad.
Allow the instrument to self-level.
