David Clark 9100 SERIES Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 55

David Clark 9100 SERIES Скачать руководство пользователя страница 15

10

19549P-31 (04-17)

7. Auxiliary Audio

The Auxiliary Audio connection is intended for use with line-level devices only.  Typical connections
include a portable CD/MP3 player’s headphone jack or the “Preamp Output” RCA jacks on a car/marine
stereo.  This cable can also be used to route audio from the Digital Intercom System to another device
(such as a camera or recorder) .  Additionally, this cable can be used to interface to a smart phone.

IMPORTANT: To connect to the External Speaker terminals of a communications or
weather radio that has balanced audio DO NOT use an aux connection. Instead use a
radio connection.

Failure to observe this warning may result in damage to the radio and/or the 9100 Digital
Intercom.

Parts/Tools Required

q

A U9102 Radio/Aux card installed in the Master Station

q

C91-20AX Auxiliary Audio Cable (40892G-21)

o

Includes 3.5mm Female to Left/Right RCA Plugs Adapter

q

Wire cutters/Wire strippers

q

Soldering iron/Solder

q

Heat-shrink tubing

q

Wire ties

Procedure

q

Route the C91-20AX Cable between the source and the Master Station. The cable should be
routed using under-deck conduits and be as far as possible from radio antenna coax cables and
anywhere water may collect. Use wire ties where necessary.

q

Connect the cable to Port 3 (Aux Out) or Port 4 (Aux In or smartphone) on the U9102 card in the
Master Station. Align red keyways and push. Pull back gently on the connector (behind the
quick-release collar) to ensure it is properly locked.

•

For Portable CD/MP3/Smartphone installation:

q

Plug 3.5mm male into the device’s 3.5mm jack labeled “Line Out” or “Headphones”.

q

Adjust device’s volume to 75% to start. Make further adjustments if necessary.

•

For Car/Marine Stereo installation:

q

Locate the “Preamp Output” RCA jacks on the stereo. Some models require an

additional adapter from the manufacturer to access these jacks.

q

Connect the supplied 3.5mm to RCA adapter cable to the stereo’s output RCA jacks.

q

Connect the C91-20AX cable to the adapter cable’s 3.5mm jack.

q

Use a waterproof, outdoor cable/coax sealant to ensure that no moisture can enter the

contacts of the RCA plugs and the 3.5mm connections.

«
...
13
14
15
16
17
...
»

Содержание 9100 SERIES
























































Отзывы:

Нет отзывов