David Clark 9100 SERIES Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 55

David Clark 9100 SERIES Скачать руководство пользователя страница 13

8

19549P-31 (04-17)

5. Radio Cables

The C91-20RD Radio Cables are used to interface a marine or mobile radio to the 9100 Digital Intercom
System.  One end of the cable connects to a U9104 or U9102 installed in the Master Station and the
other end connects to the radio.  Since the interface is different for each type of radio, the C91-20RD is
left un-prepared at the radio end so that the installer may choose the correct interface connector.

Parts/Tools Required

q

C91-20RD Radio Cable (One for each radio to be interfaced)

q

A U9104 or U9102 radio card installed in the Master Station

q

Mating connector and pin information for radio interface (installer provided)

o

Wire Crimping/Cutting/Soldering/etc. tools (depends on radio interface)

q

Wire ties

Procedure

q

Determine the path of the cable between each radio and the Master Station. The radios should
already be installed and tested.

q

Route the cable. The cable should be routed using conduits and be as far as possible from radio
antenna coax cables and anywhere water may collect. The connector end connects to the
appropriate radio card as installed in the Master Station. Leave enough excess cable at the
radio end for preparation of radio interface connector.

q

Connect the cable to one of the radio card inputs on the Master Station; Align red keyways and
push. Pull back gently on the connector (behind the quick-release collar) to ensure it is properly
locked.

q

Prepare the radio interface in accordance with manufacturer’s instructions. See

Table 5.1

for

C91-20RD Radio Cable wire color functions. The end of this cable is stripped and tinned at the
factory. Due to the difficulty in soldering to these conductors, it is recommended that any extra
cable be coiled up rather than cut.

q

Repeat this procedure for additional radios.

Pin

Color

Function

1

Red

Mic Hi (+)

2

White

Mic Lo (-)

3

Green

Ear Hi (+)

4

Black

Ear Lo (-)

5

Yellow

PTT Hi (+)

6

Blue

PTT Lo (-)

Shield

Shield (To PTT Lo or Mic Lo)

Figure 5.1 Radio Cable Wire Color Functions

«
...
11
12
13
14
15
...
»

Содержание 9100 SERIES
























































Отзывы:

Нет отзывов