Davicom AXON-8A, Быстрый старт

Страница: 44 / 50

44
4.4.6. Users
AXON units can accept 3 different users, one for each role. There is a Supervisor user, an Operator user
and a Viewer user. Note that you must be a Supervisor user to enable and configure the lower-level users.
A Viewer user can only view levels and readings in the AXON, they cannot change or control anything,
nor can they view any configuration information. To enable this user, go to the Viewer tab, enable the user
and enter a username and password.
An Operator-level user can view readings and view configuration settings, but they cannot make any
changes to the unit’s configuration. They can however re-boot the unit in the Administrator Menu.
A Supervisor-level user can view, control and configure everything in the AXON. The only user enabled by
default is the Supervisor, and this user cannot be disabled. To change the username or password, go to
the Supervisor tab.
Remember to SAVE your settings before exiting