DAVI & CIA MA08-02/B, Руководство пользователя

Страница: 8 / 26

USER’S MANUAL
MA08-02/B
7
If the equipment is
is is
is equipped with the height measurement arm:
o
Remove the height measurement arm from the packaging
o
Contains:4 Allen screws (2 for each arm), 1 Allen key.
Connect the connector to the CPU board as
shown in the diagram.
Insert the height measurement arm making
sure that the cable is properly attached.
Attach using the 2 Allen screws, so that the
height measurement arm is firmly held parallel
to the pipe facilitating its mounting.
2. 2. 2. 2.3 3 3 3. . . . LOCATION AND SETTING LOCATION AND SETTING LOCATION AND SETTING LOCATION AND SETTING
Set the equipment in a place flat and level, where it is perfectly supported. This last point is of vital importance to
proper operation.
Make sure that within a radius of 70 cm around the equipment there is no interference that might affect the
measurement of height.
To make sure that the weighing results are accurate, the scale must be exactly level in the horizontal position. To
make the job of levelling the scale easier, it is equipped with a level.
Turn the screw feet on the bottom of the platform until the bubble in the level is in the inner circle.