Davey SureFlo DSF750 Скачать руководство пользователя страница 9

Страница: 9 / 12

Removal of the Pump from Pipework

Should it be necessary to remove the pump, follow these instructions:

1. Turn off the power and remove the plug from the power source.

NOTE: If the pump is wired into a time clock or another automatic

control, the wiring should be removed by a qualified electrician.

2. Close the water valves on the pool return and the pump inlet pipework.

3. Remove the discharge & suction barrel unions taking care not to lose the O-rings.

4. Move the pipework with the barrel unions attached until the pump can be pulled clear.

NOTE: When making any enquiries about your Davey SureFlo pool pump be

certain to quote the model number from the nameplate located on motor.

Water Quality

Maintaining balanced water chemistry is important to the life of your pool pump. This pump is

designed to be used with Pool water, balanced in accordance with Langlier Saturation Index,

with a pH level of between 7.2 and 7.8 and is regularly treated with a chlorine sanitising

agent with the level not exceeding 3.0 PPM.

Please consult your local pool shop regularly to have your water tested.

Содержание SureFlo DSF750












