5
Typical installation diagram
Water pump
Sand filter
Vacuum hose
Vacuum head
Dimensions
11
550
205.5
275
136
222
25
8
18
3
24
8
92
Pipe Connection
A set of self-aligning barrel unions are provided for connecting to the piping from the pool.
The pumps are designed to accept the following PVC pipes by fitting the pipe to either the
inside or a pipe socket to the outside of the union tail.
Inlet PVC
Outlet PVC
40mm Pipe ID /
50mm Socket OD
40mm Pipe ID /
50mm Socket OD
The use of any pipe smaller than those specified above is not recommended. Suction
piping should be free from all air leaks and any humps and hollows which cause suction
difficulties. The discharge piping from the pump outlet should be connected to the inlet
connection on the swimming pool filter (usually at the filter control valve).
Barrel unions need to be hand tightened. No sealant, glues or silicones
are required.
