4
CONTROLLER SET UP
The logix 742 controller has been factory set to:
Backwash day:
Monday
Backwash start time: 2.00am
Backwash duration: 20 minutes
Rinse duration:
10 minutes
To alter these settings refer to: Operation Manual, 742/762 Control, 255 and
Performa series valves, pg 32 – 35 Initial start up step by step instructions.
The current time and day needs to be set:
1. Connect the 240/12V adapter to the controller and switch on power.
2. A default time is displayed.
3. Press
■
. The default time will flash. Use the
and
arrows to adjust to
the current time.
4. Press
■
twice.
5. A triangle will flash under ‘Su’ (Sunday).
6. Use
and
to set to the current day.
7. Press
■
.
8. Leave the controller for 30 seconds and it will default to the current time
(normal operation).
The current day is indicated by a
▲
under it. The backwash day is
indicated by a dash under it.
Example: Current Day and time = Tuesday 10:38am
Backwash day is Monday
