Davey DynaDrive DD60-10, Инструкция по установке и эксплуатации

Страница: 10 / 32

10
The display then reverts to the
HOME SCREEN
, see figure 6.2. The
Power LED
will show bright green.
The display shows the pre-set pressure on the top line (400kPa show in example), and current pressure
being measured by the DynaDrive pressure transducer (0kPa show in example). If the DynaDrive controller
measures warm &/or humid weather. It is possible for the DynaDrive controller fan to be running, even if the
DynaDrive pump isn’t.
Figure 6.2
P/
N
:1
611
5-
1 B
Pset 400
Pact 0
To start the DynaDrive:
• Pushing the
Automatic on / manual off button
toggles between
automated control
and
manual off
;
• Pushing the Automatic on / manual off button will turn on the pump and it will continue to pump
water until set pressure is achieved, see figure 6.3;
Figure 6.3
P/
N
:1
611
5-
1 B
Pset 400
Pact 400