Please pass these instructions on to the operator of this equipment.
Sump Pump
Installation and
Operating Instructions
MODELS
DOUBLE CASE:
DC10, DCS40, RS250, RSD400
DEWATERING:
D10, D15, D25, D40
VORTEX:
D15V, D25V, D40V
TWIN IMPELLER:
D42, D53
Suffix:
A
=
Automatic Float Switch Fitted
M
=
Manual (D75 Models only)
Voltage: 220/250V 50Hz Single Phase
The oil in the seal chamber should be periodically checked and replaced. This work should
be done by a suitably qualified Davey Service Dealer every 2,000hrs of operation or every 12
months, whichever occurs first.
CAUTION: This pump MUST be installed with a suitable earth leakage circuit breaker (E.L.C.B.) or
residual current device (R.C.D.) with a rated residual operating current <30mA.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
