background image

Arpeggiator 

Arpeggiator

—Turns Prophet ’08’s arpeggiator on and off. The tempo and note 

value are determined by the BPM and Clock Divide settings. Arpeggiator Mode 
is set in Miscellaneous Parameters. The different modes are: 

Mode 

Behavior 

Up 

Plays from lowest to highest note. 

Down 

Plays from highest to lowest note. 

Up Down 

Plays from lowest to highest and back to lowest. 

Assign 

Plays notes in the order keys were pressed. 

Random 

Randomly plays notes. 

2 Octaves Up 

Plays keyed notes and the same notes one octave higher, 
from lowest to highest. 

2 Octaves 
Down 

Plays keyed notes and the same notes one octave higher, 
from highest to lowest. 

2 Octaves Up 
Down 

Plays keyed notes and the same notes one octave higher, 
from lowest to highest and back to lowest. 

2 Octaves 
Assign 

Plays a keyed note, then the same note one octave higher, 
in the order keys were pressed. 

2 Octaves 
Random 

Randomly plays keyed notes and the same notes one 
octave higher. 

3 Octaves Up 

Plays keyed notes and the same notes one and two octaves 
higher, from lowest to highest. 

3 Octaves 
Down 

Plays keyed notes and the same notes one and two octaves 
higher, from highest to lowest. 

3 Octaves Up 
Down 

Plays keyed notes and the same notes one and two octaves 
higher, from lowest to highest and back to lowest. 

3 Octaves 
Assign 

Plays a keyed note, then the same note one and two 
octaves higher, in the order keys were pressed. 

3 Octaves 
Random 

Randomly plays keyed notes and the same notes one and 
two octaves higher. 

 

Briefly hold the Arpeggiator switch down to latch arpeggiated notes. (The light 
will blink when latched.) Playing additional notes while latched adds them to the 
notes already playing. 

The Arpeggiator can also be latched with a footswitch connected to the Sustain 
jack. See “Sustain” in 

Global Parameters

 on page 7. 

Note

: You can only have any specific key play one time in the arpeggio. 

That is, if you are latching keys, and hit the same note twice, it will only 
latch the most recent hit. 

 

31

 

Содержание Prophet 08 PE

































































Отзывы: