Dave Smith Instruments ob-6, Руководство по эксплуатации

Страница: 61 / 96

51 OB-6 Operation Manual Write
Write
The
write
button saves the currently active program. Saving a program
overwrites a previously saved program.
The OB-6 contains a total of 1000 programs. 500 are permanent and
500 can be overwritten. Banks 0-4 are User Banks that can be overwrit-
ten. Banks 5-9 are Factory Banks that are permanent. You can edit the
programs of either bank, but you can only save them to Banks 0-4. As
shipped from the factory, presets 000-499 are identical to 500-999.
WRITE
The Write button
1 0 2 3 4 5 6 7 8 9 SELECT
BANK
SELECT
TENS BANK PROGRAM
Local Ctrl Seq Jack Pot Mode S/- Alt Tuning Vel Response AT Response Stereo/Mono Pgm Dump
Transpose Increment Decrement Master Tune MIDI Channel MIDI Clock Clock Port Param Xmit Param Rcv MIDI Control MIDI SysEx MIDI Out
Program bank, tens, and number selectors
To save a program to the same preset location:
1. Press the
write
button. Its LED begins blinking.
2. Press a
program selector
button (0-9) to specify the “ones” digit of the program.
3. The
write
button LED stops blinking and the program is saved.
To save a program to a different bank location:
1. Press the
write
button. Its LED begins blinking.
2. Hold down the
bank
button then press a
program selector
button (0-9)
to specify the “hundreds” bank of the program. You can only save to
Banks 0-4.
3. Hold down the
tens
button then press a
program selector
button (0-9)
to specify the “tens” digit of the program.
4. Press a
program selector
button (0-9) to specify the “ones” digit of the
program.
5. The
write
button LED stops blinking and the program is saved.