Davco SHOP PRO FXP, Техническое руководство

Страница: 14 / 26

12
DAVCO Technology, LLC www.davco.com 800-328-2611 1600 Woodland Drive, Saline, MI 48176-1629
SHOP PRO
®
FXP
WITH 50/80 PSI REGULATOR
TECHNICAL MANUAL
F1348 REV G
THE FUEL PRIMING PROCEDURE FOR THE MX 13 EPA 2010, MX 13 EPA 2013 & MX 11 EPA
2013 ENGINE IS ON THE RETURN FUEL SIDE OF THE FUEL SYSTEM.
MX 13 EPA 2010
Engines
5 . Loop adapter “Adapter B” hose over the hoses for better
visibility .
6 . Connect the short pickup wand to the Shop Pro (red)
discharge hose . Remove the fuel tank cap and insert the
wand into the fuel tank and open the ball valve . Connect
the extension cord to the Shop Pro and turn on . Run the
Shop Pro for a minimum of five minutes .
7 . Turn the Shop Pro OFF . Close the ball valve on adapter
“Adapter B” and Shop Pro suction hose (Green) .
8 . Remove the Shop Pro suction hose (Green) and recon-
nect the Return Fuel Hose .
9 . Close the ball valve on the (Red) discharge hose, remove
wand from the fuel tank and replace fuel cap . Loosen
the hand primer pump and pump the handle 10 times to
pressurize the injectors .
10 . Tighten the primer pump handle in the down position .
Start the engine . If the engine will not start after 10
seconds, pump the hand primer pump an additional ten
times .
PRIMING THE PACCAR MX 13 EPA 2010 ENGINE