manualshive.com logo in svg

Daum electronic ergo_lyps, Руководство пользователя

Поделиться
Скачать
Daum electronic ergo_lyps Скачать руководство пользователя страница 47

M 4

C 

J 

D 

3

1

(1d)

(1e)

ST

2.    Assembling instructions / dashboard support complete

Required hardware

:

Dashboard support (3) with the cable 1e
incl. the pre-installed dashboard, the U shaped handle 
and the locking lever

Required tool

:

Wrench 13

The dashboard cable (1e) protruding (sticking out) from the lower end of the support column (3) 
must be connected to the device cable 

(in the receptacle of the support / ST) 

before the dashboard 

support (3) can be installed on the base frame (1). The connectors (X & Y) must be plugged 
together. This operation cannot be performed by a single person. Given the relatively important 
weight of the dashboard support column, a strong person should hold the support column (3) with 
the dashboard cable (1e) sticking out close to the receptacle on the frame (ST). A second person 
plugs the connectors (X & Y) together. Then they together install the dashboard support column (3) 
carefully on the receptacle (ST) of the frame. Take care at this moment not to jam or separate 
the cables.

When unpacking the unit, lay the dashboard support (3) with the mounted dashboard on a level 
and clean surface.

After the support column (3) is loosely installed, it must be oriented to align the holes to the 
threaded holes in the receptacle (ST). Then screw in the three M8 screws (C) with the supplied 
spring washers (D) without tightening. We recommend tightening the three screws (C) of the 
support only after all the parts have been installed (particularly the oscillating poles and the foot 
rods) and adjusted. Then you can cover the heads of the screws with the supplied caps (J).

Then you can adjust the U shaped handle (3b) and put it in the required position. The U shaped 
handle is hold in position by tightening the locking lever (3a).

2.

1

2.

2

2.

3

2.

4

Installing the dashboard

Connects
the connectors X & Y
of the dashboard and device
cables (1e & 1d)

nd

2  person

2.

4

st

1  person

Install the column
on the receptacle

Warning! Avoid jamming 
or separating the dashboard 
cable in 
the receptacle (ST)

(1e / 1d) 

2.

3

raise and
hold

Locking lever

U handle

M8

3b

3a

X

Y

Description

Assembly

Содержание ergo_lyps











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды