D / PERFORMANCE-SLICER
Date: 18-2-2015
Version: 01
USERS MANUAL
Page 14
8.3
Instructions changing knives
The knives should be positioned and tensioned correctly for the best slicing results
This should be done by a technician
Please read the procedure carefully
Turn off the main switch of the machine
In order to access the knives, you need to disconnect the in- and outfeed table aswell as the covers
from the machine.
1.
Open the top cover of the machine.
2.
Remove the in- and outfeed table.
3.
Make sure the knifeholders are aligned. Turn the wheel until they level with each other.
4.
Turn the knife to the left. Use the special knife-tool for this (see figure 8.3).
5.
Take the knife out of the holder. A click can be heard when placing back a new knife.
6.
Repeat step 4 & 5 for all the knives that need to be changed.
7.
Replace the in- and outfeedtable back in the machine.
8.
Close the cover and turn the machine back on.
Figure 8.3
